PRINT IT CLICK IT

The easiest way to attach a DepthSense camera to the Oculus DK1 and DK2. 

Download the ReachVR bracket print file for free, or order a 3D print for delivery.

no adhesive    easy to attach   easy to remove   reusable

The DS325 and Senz3D have different bases that require unique bracket attachments. Make sure to select the mounting bracket that matches your camera. 

Assembling the DS325 DK2 Bracket

DK2 BRACKET

DK1 BRACKET

Assembling the Creative Senz3D DK2 Bracket

The DK1 bracket supports both the DS325 and the Creative Senz3D cameras on a single bracket. Simply rotate the bracket 180° for the appropriate mount to your camera. 

Assembling the Creative Senz3D DK1 Bracket

Assembling the DS325 DK1 Bracket

  1. Detach the Senz3D camera from its original base by gently pulling the camera away from its base.​

  2. Remove the single screw from the underside of the camera

  3. Attach the Senz3D to the ReachVR bracket using the same screw you just removed from the underside of the camera

  4. Remove the USB/HDMI faceplate on the DK2 and replace it with the ReachVR bracket

  5. Slide the ReachVR bracket down and lock firmly into place

  1. Detach the DS325 from its original base by removing the 2 screws from the underside of the camera.​

  2. Attach the DS325 to the ReachVR bracket using the same screws you just removed from the original base

  3. Remove the USB/HDMI faceplate on the DK2 and replace it with the ReachVR bracket

  4. Slide the ReachVR bracket down and lock firmly into place

  1. Detach the DS325 from it's original base by removing the 2 screws from the underside of the camera.​

  2. Locate the side of the ReachVR DK1 bracket with 2 holes

  3. Attach the DS325 to the ReachVR bracket using the same screws you just removed from the original base.

  4. Slide the bracket onto the front of the DK

  1. Detach the Senz3D camera from it's original base by gently pulling the camera away from it's base.​

  2. Remove the single screw from the underside of the camera

  3. Locate the side of the ReachVR DK1 bracket with 1 hole

  4. Attach the Senz3D to the ReachVR bracket using the same screw you just removed from the underside of the camera.

  5. Slide the bracket onto the front of the DK

  • Wix Facebook page
  • YouTube Classic
  • Wix Twitter page

 

© SoftKinetic 2015. All rights reserved.